About Us

3D printing works amazing for initial designs. Make changes to your initial product until you are satisfied with the design.

Produce batches of your product before you move to mass production. Or if you need several variations of similar parts.

  • FDM

    Fused Deposition Modeling

    It's the most common method of 3D printing as well as most cost effective. It extrudes plastics through a nozzle and prints layer by layer.

    Material

    PLA, ABS, PET-G, Carbon, Metal

    Cost per Batch

    $-$$

  • SLS

    Selective Laser Sintering

    SLS uses a laser that sinters powered naylon layer by layer. Because the laser only sinters the part, the unsintered powder supports the model, allowing for support-free models.

    Material

    PA12

    Cost per batch

    $$$

  • Resin

    Resin printers use light to cure entire layers of prints at once decreasing the time needed for prints. This leads to faster print times, smoother finishes and higher detail for more complex prints. However Resin requires post processing and is limiting in the volume a model can be.

    Cost per batch

    $$ - $$$$

1 of 3

Contact us for more details and quotes